Cyber Secure NVR User Manual - 2022

Time Configuration

Time

1.

Click System > Time > Time .

2. Select the correct time zone, and then set date and time formats and the system time. The following shows an example.

3. To use Network Time Protocol (NTP), enable auto update, set the address and port number of the NTP server, and the update interval. 4. Click Apply to save the settings.

DST

1.

Click System > Time > DST .

2. Enable DST by selecting the check box, and then set the start time, end time, and DST bias correctly. The following shows an example.

3.

Click Apply to save the settings.

Time Synchronization

Use this function to synchronize camera time with the NVR. Time sync is enabled by default, and cameras will synchronize time with the NVR after getting online, and then synchronize once every 30 minutes. 1. Click System > Time > Time Sync .

73