Cyber Secure NVR User Manual - 2022

Problem

Possible Cause and Solution

 Check if the desired recording has been overwritten.

 Check that motion detection is enabled, and the motion detection area is properly configured.  Check that detection sensitivity is properly set.  Check that the arming schedule is properly configured.  Use the power adapter delivered with your NVR.  Power down the NVR and then mount the hard disk again.

Motion detection is not effective.

A hard disk cannot be identified by the NVR.

Try another disk slot.



 The disk is not compatible with your NVR. Contact your dealer for a list of compatible disk models.

 Use the mouse delivered with your NVR.

The mouse does not work.

Make sure no cable is extended.



95