Cyber Secure NVR User Manual - 2022

3.

Click

right to Trigger Actions and set action(s) to trigger. For

more details, see Alarm-Triggered Actions.

4.

(Optional) Click

right to Arming Schedule and then set the time

when actions will be triggered.

5. (Optional) Click Copy to apply the same settings to other cameras. 6. Click Apply to save the settings.

Video Loss

A video loss alarm occurs when the NVR loses video signals from a camera. Video loss alarm is enabled by default. 1. Click Alarm > Video Loss . To disable video loss alarm for a channel, click , which then changes to .

2.

Click

under Trigger Actions and set action(s) to trigger. For

more details, see Alarm-Triggered Actions.

NOTE! Video loss alarm cannot trigger recording, preset and preview (live view) actions for the current camera.

3.

Click

under Arming Schedule and then set the time when

actions will be triggered.

4. (Optional) Click Copy to apply the same settings to other cameras.

Alert

The NVR reports an alert when an event occurs in the system. The following are some alerts and their definitions in the system.

 Running Out of Space : Less than 10% of disk space remains.

Space Used Up : No disk space.



 Disk Offline : A disk is not properly connected or is damaged .

 Disk Abnormal : A disk can be detected but cannot be accessed.

56