Cyber Secure NVR User Manual - 2022

NOTE! To apply the same settings to other cameras, click Copy , select cameras, and then click OK .

Motion Detection

When enabled, a motion detection alarm occurs if an object inside the detection area moves to certain extent, and an alarm icon appears in the upper right corner. Motion detection is enabled on the NVR by default. Unless modified, the detection area covers the full screen, and recording is triggered only for the current camera. The settings remain if you disable motion detection and then enable it. 1. Click Alarm > Motion . 2. Select the desired camera and then select Enable to enable motion detection. 3. Use the mouse to draw a detection area, and drag the slider to set detection sensitivity, target object size, and duration. The higher the sensitivity, the more likely a moving object will be detected.

4.

Click

right to Trigger Actions and set action(s) to trigger. For

more details, see Alarm-Triggered Actions.

54